DeFli RID Device

DeFli RID Devices are (direct/broadcast) Remote ID receivers that receives Remote ID signals. Remote ID is called Direct Remote ID (DRI) in the EU and Broadcast Remote ID in the USA, it is a legal requirement for all drones weighing over 250g.

Tech

The DeFli RID receiver supports all transmission protocols (Bluetooth legacy, Bluetooth Long Range, WiFi NaN and WiFi Beacon) and all frequency bands (2.4, 5.2 and 5.8 GHz). Furthermore, DeFli RID Receiver's use Power of Ethernet (PoE 802.3af/at) for both connectivity and power. The received Remote ID information by DeFli RID Receivers is transmitted in JSON format to a MQTT broker (https://github.com/DeFliTeam/RemoteID-MQTT-subscriber).

The receiver uses the Open Drone ID framework that support both the DIN EN 4709-002 standard (EU) and ASTM F3411-22a-RID-B (USA).

Devices

DeFli RID Entry Level

Short-range radio

Bluetooth 2.4 GHz

WiFi 2.4 GHz, 5.2 GHz, 5.8 GHz

Multi GNSS Receiver (GPS, QZSS, GLONASS, BeiDou, Galileo)

Antennas

5 dBi antennas (N connector, 1x Bluetooth, 2x WiFi tri-band antenna). Can be replaced with other antennas.

Detection area

80 km2 / 5 km radius. See also section 1.9 of the manual. The actual detection area can be bigger or smaller as it depends on the installation location, such as height and obstruction of large buildings.

Power

PoE (Power over Ethernet): 802.3af/at

Average current consumption

< 5 W

Connectivity

10/100M/1000M Ethernet interface

Enclosure

plastic

Fastening mechanism

mast mount for pole mast or wall installation

IP rating

IP67

Operating temperature

-20°C to +40°C

Dimensions

27.2 x 27.6 x 9.6 (without antennas).

Weight

1.4 kg (with mast mount 1.9 kg)

DeFli RID Enhanced Level

Short-range radio

Bluetooth 2.4 GHz

WiFi 2.4 GHz, 5.2 GHz, 5.8 GHz

Multi GNSS Receiver (GPS, QZSS, GLONASS, BeiDou, Galileo)

Antennas

15 dBi antennas (N connector, 1x Bluetooth, 2x WiFi 2.4 GHz antenna, 1x WiFi 5.2/5.8 GHz antenna). The 2.4 GHz antennas are 150 cm long. Included are 4x surge protectors and 4x 50 cm antenna cables (N connector) Can be replaced with other antennas.

Detection area

700 km2 / 15 km radius. See also section 1.9 of the manual. The actual detection area can be bigger or smaller as it depends on the installation location, such as height and obstruction of large buildings.

Power

PoE (Power over Ethernet): 802.3af/at

Average current consumption

< 5 W

Connectivity

10/100M/1000M Ethernet interface

Enclosure

plastic

Fastening mechanism

mast mount for pole mast or wall installation

IP rating

IP67

Operating temperature

-20°C to +40°C

Dimensions

27.2 x 27.6 x 9.6 (without antennas).

Weight

1.4 kg (with mast mount 1.9 kg) This excludes antennas. Antennas, RF cables, surge protectors are 5 kg.

Rewards

DeFli RID Devices earn $FLI directly. The value is based on the range and activity levels of the device. You can read more in our tokenomics section.